测试人员英文自我评价（汇总17篇）

测试人员英文自我评价（通用17篇）

测试人员英文自我评价 篇1

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

测试人员英文自我评价 篇2

Since the car mechanic qualification in 20xx, has always been in line with the line, love line, fine line of work attitude, with full enthusiasm, and strive to forge ahead. In the work abide by the "product quality is the life of the enterprise," the creed, deeply shoulder the heavy responsibility to deal with strict self-discipline, meticulous and strict quality control, in strict accordance with the operating procedures and quality requirements for production, the work is summarized as follows: Work tasks in the work, the ideological, on the one hand, pay attention to political theory study, and strive to improve political literacy, on the other hand to strengthen the business knowledge of learning, improve operational capacity. In the leadership of the guidance and the support of colleagues with the help of a planned conduct of the theoretical knowledge and the study of turning technology. Seriously do a good job within the division.In doing this work at the same time I also submitted to the party to join the party application in daily life, work, I have been asked to ask a party member himself, and strive to learn what they have learned through, borrow "car mechanic practical manual "And other books, give up a lot of rest and entertainment time, study hard, and constantly improve their level of business theory. I always adhere to the business knowledge to be applied to the production of flexible, to apply their knowledge, combined with their many years in the practice of turning the practical experience to master the rules of the problem, to explore a set of practical production and easy to learn Found the problem of skills, improve the accuracy of the operator and work efficiency has played a significant role in helping, 1.5 sequence round table milling machine processing part of the fillet at the traces of the steps, affecting the quality of parts. The reason is because the fixture locking force is not enough, through repeated tests, repeated debugging Zhang angle, and ultimately eliminate the step problem. 2.35 sequence drilling machine tooling due to bad processing, with the technical staff actively ideas, think of a way to solve the tooling of the processing problems.

测试人员英文自我评价 篇3

In this school year, I am in the study, strict demands on themselves, assiduously, studious, correct attitude, clear objectives, basically mastered some of the professional knowledge. In addition to the study of professional knowledge, I also pay attention to the expansion of knowledge, extensive knowledge of other disciplines, thus improving their ideological and cultural quality, to become a good college students Fighting.

In ideology, I called for active progress, love the motherland, love the people, support the leadership of the Communist Party of China, support the principles and policies, abide by national laws and regulations and the rules and regulations to actively move closer to the party, book. I have a strong ambition, the courage to criticize and self-criticism, and establish a correct outlook on life and values. In life, to develop a good living habits, life is full and structured, there is a strict attitude towards life and good attitude to life and life style, warm and generous, honest and trustworthy, helpful, have their own good accident principle, can And students live in harmony; actively participate in various extracurricular activities, which continue to enrich their own experience.

测试人员英文自我评价 篇4

In the factory in charge of leadership and workshop under the correct leadership of the party and government departments in the various functions of the sincere cooperation and support, and always adhere to the success of this principle, the priority of efficiency, focus on " Principle, and make joint efforts to explore, making this year's coking plant operating conditions and related management work more good and standardized.

1, as a party member cadres, can be strict demands on themselves. Actively participate in various political studies, focusing on the promotion of political theory.Self-respect, self-reflection, self-encouragement, alarm bells to plant regulations, factory discipline for their own actions, set the public servant consciousness.

2, can be placed in position, and other team members live in harmony. In charge of the work of the mouth to do work in place not offside, the courage to not shirk responsibility, respect for everyone's work, truth-seeking and pragmatic, and establish a good style of work.

3, based on their own, do a good job in the workshop equipment management. First of all, in accordance with the standards of mechanical and electrical equipment to upgrade standards, and gradually improve the workshop equipment management system. Second, in their daily work, adhere to the daily maintenance and planned maintenance of the principle of combining.Third, do a good job overhaul of plant equipment management. Fourth, to strengthen the spare parts repair old and waste work. Fifth, strengthen the workshop energy conservation management work

测试人员英文自我评价 篇5

I think the first task of college students or learn cultural knowledge, so I learn in the sense, not to relax. I think a good learning method is very helpful to learn the knowledge, so every day after learning, I will summarize the learning experience. A hard one harvest, often see their achievements in progress, I will sigh as long as you have the determination, nothing is impossible. For students of our computer-related majors, the knowledge of light optics is not enough.

I use the spare time often read computer class books, and participated in a number of computer-level qualification examination, and achieved good results. I think that learning is the student's occupation, the occupation also need to have wisdom, perseverance and perseverance. In today 's fast - growing information age, I We only learn new knowledge, we will not lag behind! Overall, this semester for their achievements or decent. Single digital image processing Although this course did not learn too much of the content, but also on its basic principles have a certain understanding.

测试人员英文自我评价 篇6

In the past year, led by the leadership of the plant leadership led by the workers through the joint efforts of colleagues, and through their own positive efforts, as equipment maintenance workers I successfully completed his own work. I do a year on the work of a serious summary. The following is my summary of this year's work model essay:

First, the work attitude, ideological work

I am keen on my work, strict self-discipline, abide by the rules and regulations of the factory, strictly to the ball itself, put the work position, and always maintain a "modest, prudent, self-discipline, positive" attitude, guidance and guidance of colleagues in leadership With the help of always diligent study, proactive, and strive to improve themselves and always work hard, conscientiously complete the task, perform good job duties. Adhere to the ideals of building a good factory, a firm increase in workers' income beliefs. Continue to strengthen learning, a solid work of their own technology!

Second, do their own work

To do a mechanic, to deal with their own work to understand a clear, familiar and skilled their work. Have all the machines and equipment to understand, but also have the ability to respond to failure, deal with the equipment may occur at any time.

To meet the needs of the production schedule, our unit of equipment, although the new equipment, but also frequent failures, such as machine washing machine, no major problems, minor problems in the maintenance process, and gradually improve the machine cleaningMachine awareness, so that small problems can be dealt with quickly, as well as liquid sandblasting machine, in use, there is always a failure to plug the nozzle, so that can not work, broken through the brain, after operator description Cause of the failure, my analysis, the glass beads used in diameter than in the past, and the specifications are not uniform, resulting in a blocked nozzle, after a bold improvement, increasing the nozzle aperture, the liquid blasting machine is normal work , The tunnel cleaning machine, always produces the transmission chain does not move, before the adjustment of friction, you can, but once, how to adjust the friction, does not work, after analysis, that the friction coefficient is not enough, Found, really inside the oil, after careful cleaning, remove the oil, everything is normal, and so a series of maintenance work, we must understand the principle of equipment in order to good maintenance, which is my years of experience in maintenance , I will try to study, once understood, they suddenly realized, looks complicated, as long as understand, it will be simple, I not only bear the equipment maintenance work, but also completed a lot of tooling production .

For example, several engine-based experimental bench design, mobile engine rack, and so on dozens of pieces, this year we re-manufacturing engine varieties increased a lot, not the previous test bench, the workshop down the task , We immediately accept, and actively to complete, from the concept to the leadership through the design intent, and then cutting the welding, production, and so on, until the engine is placed, commissioning, delivery, each engine model of the experiment Have to go through our first process, like the troops and horses do not move forage first, when a variety of engines in my production on the bench test, I feel very honored, thank the leadership to me such a platform, but also Feel the excitement of the results of our work, but also for our development in the manufacture of pride, but these will make me work harder, modest and prudent to learn from others, as much as possible to improve their ability to work themselves in their own Of the posts to play to the maximum effect, faster and more

Efficiency of the completion of their own work, but also enable us to get the maximum benefit units, so that my work and the harvest workers can achieve a balance, so I am more motivated, more confident work. Interpersonal relationships with other colleagues are also important because a person 's ability is limited and the success of everything depends on the collective wisdom. Therefore, it is the prerequisite for the successful completion of the tasks assigned by the leader to unite with the colleagues , This is not just work, usually life is also the case, so the unity of other colleagues is not only a personal thing is a duty to work!

I have a very good relationship with my colleagues, often help each other, because the mechanic I started only one, there is a maintenance worker, a good relationship, and I work with colleagues, I respect, at work, mutual cooperation , Is to improve the efficiency of a lot, for example, in the welding oil depot anti-theft window, the door of the test station in the production of sandblasting between the asbestos roof, give sandblasting between the welding air pipe, we collectively Homework, mutual cooperation, initiative, the task is completed very quickly, this is the power of unity, to play the power of everyone in order to make work progress faster. I deeply understand. In the repair of the old and waste conservation, but also everywhere carefully, in the production of rain roof, with the waste angle, in the welding air pressure pipe, the use of the plant is the retirement of threading pipe.

Third, review the past, look to the future

For the past gains and losses, I will learn from the favorable factors to strengthen their ability to work, the negative factors in their work after the exclusion, a year of work for me to continue to make progress on the road to make certain , I believe that through my efforts and colleagues, as well as the leadership of the guidance, I will be a good staff, give full play to my ability, but also to thank the leadership of this a suitable job position, so I can For the community to make their own contribution.Over the past year, I have done the best, I believe that in the future work for the development of remanufacturing, in order to improve the income of workers, I will continue to continue efforts. Although my work has been unsatisfactory in the past year, I believe that as long as I am in the post one day, I will make my best efforts to use all my energy and ability in my work. He must be able to do a good job.

测试人员英文自我评价 篇7

I remember the first week of internship, we are very excited, a week down we feel very relaxed, rest for two days, began measuring practice, I followed the teacher to find the control point, then everyone is still excited, that the next Of the week should also be very easy, it is not. Although a bit lucky, but we all learn a lot, only a lot of ordinary "a lot of shopping" to learn things. I like to think, like the summary, so I summed up the following points:

Grow up, to try to take some responsibility. We are born with a kind of inertia, whether individuals, or a team, if it is in an inert atmosphere, that she (people) efficiency will not be high, but if everyone has a strong sense of responsibility, Take some responsibility, then the efficiency is not only improved, and the task will be completed very well.

Infectivity is very important. In a team, in order to have a good atmosphere, the first person to put forward the idea of thinking is very important, because later people can not help but have a herd mentality. If he (she) the idea is positive, then someone will actively think of some problems. On the contrary, the whole team into a negative atmosphere. Therefore, each of us should actively think about the problem.

Think a lot. What is the internship, internship is the theoretical knowledge into their own knowledge of the process. Internship process only a lot of thinking, in order to digest a lot of knowledge, but also extends a lot of previously unknown. Teamwork, through thick and thin. This is a cliché, but in this practice have to mention, because it is everywhere, remember very clearly that many times we are on the measurement site for lunch; is that we all get up early, and then in the cold Whiz in the operation, everyone in the trembling; we are carrying the instrument touched the black home. All this bitter and happy, we all bear together. Through thick and thin, we are happy! Learn to compromise. Compromise is the highest art, in the process of cooperation, inevitably there will be some conflicts, then we need to calm down to think about the solution to the problem, everyone has done some concessions, then things are easy to solve.

测试人员英文自我评价 篇8

Fast forward ten months later, the passage of time is always in the silent. I really appreciate the company offered me an opportunity to grow with the company and the trust in me with cultivation.

During this time, I am most grateful person is my chief. Because his patient guidance concerned with understanding, so I do not have patience, impatient and careless character, etc. are improved, more mature mentality. Work, his subordinates are very strict, strict checks on each of the procurement process, section chief in charge of procurement has been very arduous task, the task of subordinates accountable not have the slightest neglect, even without thinking I too, did not expect the small details he will be fine, sharp perspective perceived. Life, he was like a big brother, we found that depressed mood or not feeling well when he will be very careful to care. He is in my mind has become a model of excellence procurement engineer.

Procurement is one of the core business of the company is related to an important part of each business unit normal production, so I am very grateful to the leadership of confidence in me, I will be transferred on such an important job, give me a chance to serve the company's services, I know nothing of the procurement from the original to know more people and things, to reach more new things, learned a lot of new knowledge, an increase of more knowledge.

Chief of attentive care and support teaching and all the leaders of the company, through the procurement of ten months, so I know a lot of sense, but also accumulated some of the past never had the experience, but also understand the procurement and purchase of outstanding between difference. Learned that a procurement is to have the basic qualities in have a good work ethic, based on providing the best value from suppliers, adhere to the integrity as the basis of work and behavior; avoid all possible harm business transactions suppliers, as well as other business dealings with their objects; strive to improve their knowledge obtained in the procurement processes; adopt and adhere to good business principles in the transaction, etc., which I have mastered, but still need to continue to improve.

Each purchase requisitions, I will first ask the applicant required to apply detailed specification models and reasons why the number of these applications; then roughly statistics consumable replacement cycle of each business sector, if there are special circumstances , to be on top of the monthly purchase plan as well as the material please apply for part of the applicant will be asked to write a written requisition grounds, and asked leading signature sector, handed the purchasing department.

Procurement process, I will consider the price factor, the power to do their best to maximize cost savings, do arrive more than five. Constantly rebuffed, reflection, summary, the process of trying to figure out their own, communicate with suppliers, inquiry, bargain and other aspects of the operation, a clear procurement different characteristics in all aspects of the role and significance.

Finally, I hope that is about to usher in 20xx, under the leadership of Xing Kezhang more perfect themselves, and constantly break their own, to achieve the maximum benefit the company gave its part.

测试人员英文自我评价 篇9

i hold office here since nov.1st,20xx,obedience to leadership,willing to work,and shows assiduity in charge of all my work,well professional ethics,well-behaved,endure hardship and work hard,do everything without complaint despite hardships and

criticism.in a short time,i'm quickly familiar with and skilled in cashier,which is strong specilized in fanacial work.during this

period,mistake never occurs.united with relationship between superior and subordinate.under arrange with superior,i have accomplished every work as quickly and correctly as i can,whether do my bit or

not.because of young,i'll put all my resources of energe in the company.in the future while accomplish my own work,strengthen the study of every work,such as business,etc.continuing to raise and perfect to own business quality and efficiency.i'll never fail to live up to what the learship's trust in and expect of me.make my own contribution to the company grow stronger。

测试人员英文自我评价 篇10

1, political and ideological aspects

Adhere to the study of Marxism-Leninism, Mao Zedong (reproduced in: measuring professional work self-identification) East thought, practice "Three Represents", establish a scientific concept of development. Always strict demands on themselves, based on their own, assiduously business technology, and strive to do a good job. Listen to a variety of superior field, throughout the county to carry out measurement work, regardless of the working environment, can be consistent, perseverance to do their own work. Work hard, active, practical style, diligent in thinking, efficiency, and always maintain a strong sense of dedication and dedication, and actively contribute to the development of measurement work ideas, dedicated their meager strength.

Second, professional and technical work

Since I joined the work, I have worked hard to learn engineering knowledge and improve my job skills in order to meet the needs of my work. Through my own efforts and with the help of my colleagues and leaders, I have been able to work effectively and efficiently. Since taking office, I actively undertake the work of engineering surveying tasks, can be done conscientiously, the successful completion of the tasks assigned by the organization, never for their own private affairs affect the normal work, and actively participate in the organization of the activities. The following are the major tasks that have been completed since my appointment:

1, according to the county party committee and government requirements to complete the county key town topographic map measurement and county control planning topographic mapping measurement; 2, since 20xx to complete the county 21 townships new community, farmer settlement survey work;

3, the synergy to complete the county key projects and investment projects related to measurement work;

4, completed the industrial park and the backup industrial park topography measurement 18 square kilometers;

5, the completion of the municipal government issued a special standardization of the topographic maps, map measurement work;

6, to complete the county key road Avenue, Avenue, Road, Avenue vertical and horizontal cross-section measurement, strip chart measurement;

7, coordinated the completion of the county control network encryption and cors station construction;

8, to complete the footwear industrial park, Sands commercial center, building materials market and other urban and rural integration projects to promote the work of measurement. In order to better adapt to the measurement work, and strive to do their own work at the same time. I attach great importance to continuing education and learning, and actively participate in various departments of the organization of laws, regulations and professional and technical training.

Third, the existing problems

Measurement and management related to the ability and level to be improved, not enough innovation. In future work, I will be more hard to learn, use the knowledge to strive to enhance the level of operational capacity, and constantly improve the working methods, improve the work.

For efficiency, down-to-earth, hard working, hard work, to become an excellent measurement of professional and technical personnel.

测试人员英文自我评价 篇11

Since July 21 joined Road Equity Investment Fund Management Co., Ltd., with the leadership and colleagues in the company's teaching, training and help, making me in the ideological, work, study all aspects have been improved to varying degrees. Some of the previous work experience and school-related exercise in the work I have engaged in this now have some help, but many things need to re-understand and experience. Learning and practice can produce results of mutual integration, which are inseparable from the patient leadership unit of instruction and intangible body and mind, which I sincerely express my gratitude. Now my probation period since the relevant work summary is as follows:

1. Reimbursement: in strict accordance with the requirements of the financial system, handling expenses reimbursement matters, handling cash, online banking, check the receipt and payment business, so that the cash Nissin statements, reimbursement accurate, and special circumstances, special treatment.

2. Software accounting: timely registration in the financial software, cash, bank accounts, accurate receipt and payment, and regular checks with bank accounts.

3. Statement: according to the weekly capital statements, according to the needs of the preparation of balance sheet.

4. Cash, bills, check and document management: cash and notes management properly, perfect, notes and documents received in time registration, so that evidence to follow.

5. Payroll: the monthly payment of wages in a timely manner and accurate.

6. Banks matters: the daily banking business, mainly including the use of reserve funds, bank account opening, financial products to purchase, the public \ private money receipt and payment, the end of the month and the beginning of bank statements print, bulk card, credit card And so on with the bank docking matters.

7. Fixed asset management: do software card entry timely, accurate, when the physical inventory inventory, and regular inventory.

8. Financial-related system modification, layout, according to the company's financial system documentation, the production of financial expenses reimbursement process (visio diagram) and the corresponding PPT.

9. According to the business center needs, leadership requirements, collect and organize the financial analysis of the data required to produce the appropriate chart and formatting.

10. Timely and efficient completion of the leadership of the other tasks, to help other departments do the relevant financial work.

After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the company's financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the company's management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each other.Finally, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.

These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the company's development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.

测试人员英文自我评价 篇12

years in July graduated from work, I have from a naive student gradually grow into a qualified technical staff, after several years of on-site practical work, I have summed up a suit of their own procedures. Over the past few years I have been engaged in mechanical turning, milling, CNC lathe. Now is engaged in: the fixture set, CAD drawings, machining process scheduling and workshop director.

In the project I was responsible for technical management, work has been conscientious and meticulous work, has been pursuing scientific management, strict construction quality requirements to ensure that the construction of a check pass rate of 100%. In the management work, I strengthen the quality management, cost management, schedule management, security management.

In quality management, I put the quality of life-long responsibility system to strengthen the management, a clear responsibility to strengthen the responsibility of the management card as the focus of the construction process, thus ensuring the quality of the construction process qualified, while increasing the quality of day-to-day management, To the process failure shall not be carried out under the procedures of construction, to ensure that every process control. At the same time to strengthen the construction of pre-construction technical disclosure, the preparation and implementation of the program supervision. Work in the strict implementation of various standards, to strengthen the process of quality control, the implementation of quality wage system, high quality and competitive prices, to create a quality project has played a catalytic role.

In the cost management, in the construction cost to do a good job before the forecast, the construction cost management in the implementation of dynamic monitoring and management, so that the project cost has always been orderly and controllable management system to run. In the actual construction, it is forbidden to carry out large-scale rework in the field, rationally use materials, make use of old materials and waste materials, and minimize the project input. Meanwhile, strengthen the management of machinery, regularly inspect and do well maintenance and improve the comprehensive utilization rate. run.

In order to ensure that the control point construction task is completed on time, I carefully organize, do a good job of construction preparation, the implementation of the weekly plan, the implementation of the project plan for the project management, Management, to the Japanese security week, to Zhoubao month. Reasonable division of the construction phase, the use of parallel flow construction method. Strengthen the safety management on the construction site for a long time, on-site construction environment is responsible for the characteristics of frequent intertwined operations to strengthen the construction site safety management, and strengthen employee self-protection awareness, insist on safety work in the first place, strengthen the safety , Fire education, and establish the safety of all people, and everyone to implement the provisions of fire safety, so that every day about security, and every day to implement security, check every day security. Years of on-site work I have been a positive attitude to play to their strengths, and actively work. 20xx Petrochemical Company in Dalian, a distillation expansion project proposed rationalization proposals for the project to save money 200,000 yuan, not only reduces the difficulty of construction and improve the efficiency of construction, in the tight schedule, the task of large, difficult operating conditions Reasonable division of the construction phase to ensure the quality of the construction in advance to complete the creation of good conditions, won the Party, the Commissioner and many other leaders of the highly praised. I have been involved in the work of the main work, but I engaged in or involved in other work there are many: If the project has been involved in a number of tender work, project management and other pre-settlement. In all my work, can be responsible, positive thinking, and constantly learn new knowledge, comprehensive and final consideration of the project construction, the successful completion of the leadership to the various tasks. Over the years I was named the company's top ten young people, outstanding staff, writing papers, rationalization proposals, construction technology program has been rated as outstanding works.

测试人员英文自我评价 篇13

In the past work * months, there is joy, success, frustration and failure in the leadership and care and guidance, with the support of colleagues in the full support of my ability to work has been greatly improved, now * Monthly self-evaluation of my work is as follows:

I have been working in the company since the help of my colleagues in the care, through personal efforts and work-related experience of the accumulation of knowledge continues to widen, the ability to work and work has made great progress.

At work, conscientiously study business knowledge, continue to accumulate experience, and actively participate in learning and training, and constantly enrich themselves; 2, compliance. 3 months, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, earnestly completed the work of the job tasks; 3, unite colleagues and work together. 4, due to their lack of work experience in the work of the lack of practical experience in dealing with customer complaints, service work done enough meticulous, this is my future direction of the effort.

I am sincere, optimistic and cheerful, rich fighting spirit, hard-working. Have a strong sense of responsibility and team spirit, have a strong ability to learn and adapt to the new environment, strong desire for knowledge, strong-hearted, willing to help others, love communication, interpersonal relationships it is good.

In the ordinary workplace, establish a "customer first, the intention of service" concept is my company for each employee of the most basic requirements. I deeply understand that the dry line will love his party, love line will be special line, special line to make first-class work performance. First-class service work requires us to strengthen the service concept, enhance service awareness at the same time, we must from love and dedication, honesty and trustworthiness, willing to start.

I strive to work in the future I would like to grow into a good staff, strive for the company to bring greater benefits.

测试人员英文自我评价 篇14

High the next semester of life has officially opened the curtain. I want to combine the recent situation in the development of a learning goal: first, reasonable time, adjust the schedule, assign good learning, work, entertainment time. Second, the quality and quantity to complete the assignment of the teacher, the teacher assignments are generally her years of teaching experience in the summary, with high value, ... ... earnestly take the exam, exam carefully reviewed. In addition, actively read the books and information, to expand their knowledge; often ask questions, discuss with students, to seize the time to learn some other areas of professional knowledge, knowledge is always useful.

测试人员英文自我评价 篇15

On July 9th, 20xx, I went to Wenquan Town of Xifeng County together with 14 other students to start our 6-month internship. During this period, I was assigned to the office of the Social Affairs Office. Responsible for rural reconstruction in 20xx the end of the work and rural reconstruction in 20xx and four in the rural areas in the rural well-off construction work carried out.

Six months of working experience, let me gradually familiar with their work, but also improve the quality of all aspects of work, but also accumulated a certain amount of work experience. My work is monotonous and repetitive, but this is the most effective way of tempering the will, I told myself to be completed, to do everything in the process of difficulties, we must strive to not give up.

Six months of internship I learned a lot: first, the work of the government departments have a deeper understanding, but also more determined the direction of the future; work, we continue to apply the knowledge of books to practice, to The instructors learn excellent work experience, and thus lay the foundation for their future work.

This is not only a simple internship, or a life experience, is a valuable asset in life. Thanks to the town government to give us such a warm contact with the grassroots level, understand the opportunities of the grassroots. In the future, I want to participate in more social practice, honing their own at the same time so that they continue to grow.

测试人员英文自我评价 篇16

Time off quickly, blink of an eye, I went to Hengyuan company project department, has more than six months.In these days, success, failure, joy, and distress. In the leadership of the care and guidance, colleagues in the full support and help, my ability to work has been greatly improved.

From the unit, I know their own shortcomings and the direction of the effort, now in the project department engaged in the measurement of construction tests and so on. In addition to the work of the Ministry of Construction, , To learn more about my colleagues work knowledge and communication. I know that their experience and experience are inadequate, practice is also very flawed, but do not know I asked, and access to information and drawings, colleagues in the office and the leadership of the help, feel that they learned these days Many, every day is full. Now the work of these days to do a self-assessment.

1, 1, to study hard and continuously improve professional competence. At work, serious study of professional knowledge, practice and theory will be combined, continue to accumulate experience, a lot of professionals, technical staff advice, and constantly enrich themselves;

2, abide by the rules and regulations, these days, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, more to see more to listen to more questions, carefully to complete the construction test of the work tasks; , Unity of colleagues, work together, colleagues, harmonious relations, unity and fraternity, mutual help, mutual respect and understanding;

4, due to their lack of work experience in the work of the lack of practical experience, quality inspection work done inadequate, through the subsequent accumulation of learning and practice, and more to my colleagues to learn, this is my future work to make good efforts direction.

Second, the attitude in the professional, everyone has a motivated heart, I not only work for the company, working for the boss, I work for themselves, I believe they can do a very hot heart, a pair of very Hard - working hands. On the one hand I should not rigidly adhere to some things, to be good at breakthroughs, creative ideas, but also to the overall situation, the team as the most important, can not be too personal. And then later in the process of doing things to pay attention to the method, so as to make work more efficient and reduce unnecessary duplication of work, things will do better. In the professional field, I have been working in the project department of the company. With the help of my colleagues, I have gained more and more knowledge through professional efforts and work experience.

3, review these days, I seriously study the professional knowledge of road and bridge, study diligently, wholeheartedly, courteous, warm, patiently answer the problems in the work, and in practice to improve their quality and professional level, and strive to grow As a qualified Hengyuan employees. These days, let me on their own jobs and the company's advantages of resources, have a more profound understanding and understanding, which can be more quickly adapt to their jobs, give full play to their initiative, in the future work andLife, I believe that through their own efforts, in the future work, I will grow into a professional and responsible staff, to become the object of learning for others to contribute to the company. With the increase in their working days, to achieve their goals, reflecting the value of their lives, and the company grow together. I will use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!

测试人员英文自我评价 篇17

Over the past year, according to the standards of Party members and leading cadres, I have been strict with myself, strengthened political belief, strengthened political theory study, changed work ideas, improved work style, adhered to honesty and self-discipline, conscientiously abided by the law and conscientiously performed their duties. Development concept. "

First, the German side

Conscientiously implement the democratic centralism, the overall situation. Respect leaders, unity and leadership of the majority of cadres and workers, thinking style is correct, work style at ease, dare to uphold the principle.

Second, in terms of energy

Familiar with and grasp the Changbu of the principles and policies can be a better combination of the actual situation to be implemented in the workshop; better coordination of all aspects of the relationship, and fully mobilize the enthusiasm of the staff work.

Third, in the ground aspects

I have a strong sense of responsibility, work seriously, a positive attitude, dare to be responsible, do not care about personal gains and losses; work diligent, hard work, hard working;

Fourth, in terms of performance

I work clear thinking, forward-looking strong, pioneering spirit, pay attention to working methods, high efficiency; can be completed on time or ahead of the tasks, the effect is good.

Fifth, in the area of integrity

Strict implementation and maintenance of the party's "four disciplines, eight requirements", consciously abide by the "honest political criteria", consciously do to abide by the party's discipline unswervingly. Enhance the sense of supervision, take the initiative to accept the party organizations, party members and the masses of supervision.