机械专业的英语自我评价(实用12篇)

机械专业的英语自我评价（精选12篇）

机械专业的英语自我评价 篇1

1, familiar with large-scale project bidding process, familiar with procurement, business contract process, familiar with erp

2, familiar with mechanical welding technology and metal materials (including the United States asme and China Machinery gb, chemical standard hg); familiar with the car development process, and related project management experience; proficiency in the use cad drawing, proe; familiar with the project management, 3 years project management experience, able to use exel and project preparation of a project plan, the familiar project quotation; familiar with and prepared over the construction design of large-scale project organization; to participate independently familiar with the communication between customers and suppliers;; technical studies and research to adapt to travel.

1、熟悉大型工程项目招投标过程，熟悉采购、商务合同流程，熟悉erp

2、熟悉机械焊接工艺和金属材料(包括美国asme和中国机械gb、化工标准hg);熟悉汽车研发流程，并有相关项目管理经验;能熟练运用cad制图，proe;熟悉项目管理，有3年项目管理经验，能使用exel和project编写制定项目计划，熟悉工程报价;熟悉并编制过大型项目组织施工设计 ;能独立参与技术调研和研究;熟悉与客户和供应商之间沟通 ;能适应出差。

机械专业的英语自我评价 篇2

In the course of their work, combined with personal expertise, due to personal positions, excellent and successful completion of the job; learn, and constantly improve themselves in their work. Cheerful personality, good communication skills, have a strong affinity; quick mind, quick thinking, the courage to take the pressure, able to independently analyze and solve problems; optimistic, with a strong sense of responsibility, the overall situation can be, well with others exchange and cooperation.

在工作过程中，结合个人专业知识，尽职于个人岗位，出色并成功地完成了本职工作;虚心学习，不断在工作中完善自己。个性开朗，善于与人沟通，有较强的亲和力;头脑灵活，思维敏捷，敢于承担压力，能够独立分析解决问题;乐观向上，具有极强的责任心，能够以大局为重，与他人很好地交流并合作。

机械专业的英语自我评价 篇3

In the course of their work, combined with personal expertise, due to personal positions, excellent and successful completion of the job; learn, and constantly improve themselves in their work. Cheerful personality, good communication skills, have a strong affinity; quick mind, quick thinking, the courage to take the pressure, able to independently analyze and solve problems; optimistic, with a strong sense of responsibility, the overall situation can be, well with others exchange and cooperation.

在工作过程中，结合个人专业知识，尽职于个人岗位，出色并成功地完成了本职工作;虚心学习，不断在工作中完善自己。个性开朗，善于与人沟通，有较强的亲和力;头脑灵活，思维敏捷，敢于承担压力，能够独立分析解决问题;乐观向上，具有极强的责任心，能够以大局为重，与他人很好地交流并合作。

机械专业的英语自我评价 篇4

Nearly seven years multinational logistics and supply chain management experience, fluent in English, three years in charge of the post. Good professional quality, proactive thinking, self-motivated and responsible attitude. Strong communication skills and teamwork.

机械专业的英语自我评价 篇5

Machinery automation for many years of work experience, familiar with the operation and management of enterprises, with strong communication skills, good at establishing efficient team. Familiar with the internet / intranet technology, familiar erp theory and implementation methods. Others sincere enthusiasm, diligence and steady organized. Serious and responsible attitude towards work, careful and cautious, obey the leadership arrangements, open to suggestions and criticism. Work in harmony to get along with colleagues, the good-subordinate relationship.

多年的机械自动化工作经验，熟悉企业的运营管理，具备较强的沟通能力，善于建立高效的工作团队。熟悉internet/intranet技术，熟悉erp理论及实施方法。待人诚恳热情，处事稳重有条理。对待工作认真负责，仔细谨慎，服从领导安排，虚心接受建议与批评。在工作中与同事相处和睦，上下级关系良好。

机械专业的英语自我评价 篇6

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

机械专业的英语自我评价 篇7

Confidence and perseverance are my principles, calm and optimism are my attitudes, positive and aggressive is my life, my personal characteristics work carefully, have a clear mind and a good ability to accept, and have certain Experience. Confident of his ability and enthusiasm for the company's construction and development has made some contribution.

自信和执着是我的原则，沉着和乐观是我的处事态度，积极和进取是我的生活方式，我的个人特点是工作认真仔细，有清晰的头脑及很好的接受能力，并拥有一定的实践经验。自信有能力和热情对公司的建设和发展做出一定的贡献。

机械专业的英语自我评价 篇8

n practice work, serious and responsible, practical work hard, you do not understand the place to ask humbly to the competent colleagues, good at thinking, take notes, review notes daily, weekly writing experience, adhere to the recording bit of work, lessons learned. The acquired knowledge to concrete work, quality and quantity to complete the task, attentive patience intention is a qualified financial staff that have the quality, I will always insist, although usually perhaps careless, but the work up, facing the data can not be the slightest sloppy, did not urgent, the Chinese Tai Chi Tao financial officers who can be the ultimate reflection. Mutual help in the group, with good teamwork and communication capacity to assist, and competent colleagues along well.

在实习工作上，认真负责，踏实肯干，遇到不懂的地方虚心向主管同事请教，善于思考，做好笔记，每天温习笔记，每周写心得，坚持记录工作点滴，总结经验。把学到的知识运用到具体工作中，保质保量完成工作任务，细心耐心用心是一个合格财务人员该具备的素质，我会一直坚持，虽然平时或许大大咧咧，但是工作起来，对着数据不能丝毫马虎，也不能丝毫急切，中国太极之道在财务人员身上能得到极致的反映。在小组中互帮互助，具备较好团队精神和沟通协助能力，和同事主管相处和睦。

机械专业的英语自我评价 篇9

I have a great ability to learn and willing to learn, innovation, constantly striving for excellence; as a participant, I have an honest character, full of team spirit; As a leader, I have a brisk and resolute style, good communication and interpersonal skills. Computer highly relevant expertise and logistics management system training, work experience in companies and universities. Serious and responsible work, proactive, optimistic personality attached.

机械专业的英语自我评价 篇10

Humble man of integrity, optimism up, work hard and pragmatic, strong adaptability and teamwork skills. Work, strong sense of responsibility, strong adaptability, attitude enthusiasm, work carefully, have some good leadership skills; proficiency in the use of word, excel, ppt, autocad and other common office software, and achieved iso9001: 20xx version quality management system audit membership.

为人诚信谦和，态度乐观向上，做事勤奋务实，有较强的适应能力和团体协作能力。工作上，责任心强、适应能力强、态度热忱、做事细心，良具备一定的领导能力;能熟练使用word，excel，ppt，autocad等常用办公软件，并取得iso9001：20xx版质量管理体系内审员资格。

机械专业的英语自我评价 篇11

1, political and ideological aspects

Adhere to the study of Marxism-Leninism, Mao Zedong (reproduced in: measuring professional work self-identification) East thought, practice "Three Represents", establish a scientific concept of development. Always strict demands on themselves, based on their own, assiduously business technology, and strive to do a good job. Listen to a variety of superior field, throughout the county to carry out measurement work, regardless of the working environment, can be consistent, perseverance to do their own work. Work hard, active, practical style, diligent in thinking, efficiency, and always maintain a strong sense of dedication and dedication, and actively contribute to the development of measurement work ideas, dedicated their meager strength.

Second, professional and technical work

Since I joined the work, I have worked hard to learn engineering knowledge and improve my job skills in order to meet the needs of my work. Through my own efforts and with the help of my colleagues and leaders, I have been able to work effectively and efficiently. Since taking office, I actively undertake the work of engineering surveying tasks, can be done conscientiously, the successful completion of the tasks assigned by the organization, never for their own private affairs affect the normal work, and actively participate in the organization of the activities. The following are the major tasks that have been completed since my appointment:

1, according to the county party committee and government requirements to complete the county key town topographic map measurement and county control planning topographic mapping measurement; 2, since 20xx to complete the county 21 townships new community, farmer settlement survey work;

3, the synergy to complete the county key projects and investment projects related to measurement work;

4, completed the industrial park and the backup industrial park topography measurement 18 square kilometers;

5, the completion of the municipal government issued a special standardization of the topographic maps, map measurement work;

6, to complete the county key road Avenue, Avenue, Road, Avenue vertical and horizontal cross-section measurement, strip chart measurement;

7, coordinated the completion of the county control network encryption and cors station construction;

8, to complete the footwear industrial park, Sands commercial center, building materials market and other urban and rural integration projects to promote the work of measurement. In order to better adapt to the measurement work, and strive to do their own work at the same time. I attach great importance to continuing education and learning, and actively participate in various departments of the organization of laws, regulations and professional and technical training.

Third, the existing problems

Measurement and management related to the ability and level to be improved, not enough innovation. In future work, I will be more hard to learn, use the knowledge to strive to enhance the level of operational capacity, and constantly improve the working methods, improve the work.

For efficiency, down-to-earth, hard working, hard work, to become an excellent measurement of professional and technical personnel.

机械专业的英语自我评价 篇12

Multinational foreign work experience, English is good. Engaged in public works during the service engineer, director of engineering, equipment, management of the project are more experience. More familiar to iso9001 system, while learning and applying Six Sigma and Lean tools, organization and management team deal with complex issues.

有跨国外企工作经验，英语良好。在职期间从事过公用工程工程师、工程部主管，对设备、项目的管理较有心得。对iso9001体系比较熟悉,同时学习并应用六西格玛和精益生产工具,组织并管理团队处理各种复杂问题。